=== release 0.10.4 ===

2006-05-11   <>

	* configure.ac:
	  releasing 0.10.4, "Solomillo de Ternera"

2006-05-10  Edward Hervey  <edward@fluendo.com>

	* gnl/gnlcomposition.c: (get_clean_toplevel_stack),
	(update_pipeline):
	Fix for correctly playing compositions with gaps between objects.
	* tests/check/Makefile.am:
	* tests/check/complex.c: (gst_element_factory_make_or_warn),
	(composition_pad_added_cb), (compare_segments),
	(sinkpad_event_probe), (sinkpad_buffer_probe), (videotest_gnl_src),
	(videotest_in_bin_gnl_src), (segment_new), (GST_START_TEST),
	(gnonlin_suite), (main):
	Added new unittests for compositions with gaps between objects.
	* tests/check/simple.c: (gnonlin_suite):
	Moved de-activated test_one_above_another to complex

2006-05-10  Edward Hervey  <edward@fluendo.com>

	* configure.ac:
	0.10.3.2 pre-release

2006-05-08  Edward Hervey  <edward@fluendo.com>

	* gnl/gnlsource.c: (pad_event_probe):
	Don't call ghost_seek_pad() in the event probe and only discard
	the events. The buffer probe will eventually take care of that.
	This guarantees that upstream elements are initialized and ready to
	handle seek events.

2006-05-08  Edward Hervey  <edward@fluendo.com>

	* gnl/gnlcomposition.c: (gnl_composition_finalize),
	(gnl_composition_handle_message),
	(gnl_composition_ghost_pad_set_target),
	(gnl_composition_change_state), (no_more_pads_object_cb),
	(update_pipeline):
	* gnl/gnlfilesource.c: (gnl_filesource_init):
	* gnl/gnlobject.c: (translate_incoming_seek),
	(gnl_object_ghost_pad_full), (gnl_object_remove_ghost_pad),
	(gnl_object_change_state):
	* gnl/gnlsource.c: (gnl_source_class_init), (gnl_source_prepare),
	(element_pad_added_cb), (element_pad_removed_cb), (ghost_seek_pad),
	(pad_event_probe), (has_dynamic_srcpads),
	(gnl_source_control_element_func), (gnl_source_add_element),
	(gnl_source_remove_element), (gnl_source_change_state):
	* gnl/gnlsource.h:
	Indent properly using gstreamer/tools/gst-indent

2006-05-08  Edward Hervey  <edward@fluendo.com>

	* gnl/gnlcomposition.c: (gnl_composition_ghost_pad_set_target),
	(get_src_pad), (update_pipeline):
	Convert non-fatal GST_WARNING to GST_DEBUG.

2006-05-08  Edward Hervey  <edward@fluendo.com>

	* autogen.sh:
	Update dependency checking

2006-05-08  Edward Hervey  <edward@fluendo.com>

	* gnl/gnlfilesource.c: (gnl_filesource_class_init),
	(gnl_filesource_init):
	No more redundant bin containing filesrc and decodebin.
	We use the GnlSource controls_one and control_element() class properties
	to inform GnlSource it should control decodebin but still accept
	filesrc.
	* gnl/gnlsource.c: (gnl_source_class_init),
	(gnl_source_control_element_func), (gnl_source_add_element),
	(gnl_source_remove_element):
	* gnl/gnlsource.h:
	Added two class properties:
	_ controls_one which tells whether the class controls only one object
	_ control_element() virtual_method which should be called by subclasses
	that have several elements to specify which element should be checked
	for pad-added/pad-removed.

2006-05-05  Edward Hervey  <edward@fluendo.com>

	* gnl/gnlfilesource.c: (gnl_filesource_class_init),
	(decodebin_pad_added_cb), (find_ghost_pad),
	(decodebin_pad_removed_cb), (gnl_filesource_init):
	* gnl/gnlfilesource.h:
	Simplify GnlFileSource to be a subclass of GnlSource.	
	* gnl/gnlsource.c: (element_pad_added_cb),
	(gnl_source_change_state):
	Add event probe for dynamic pads too.
	Don't error out in state_change.

2006-05-05  Edward Hervey  <edward@fluendo.com>

	* gnl/Makefile.am:
	* gnl/gnlfilesource.c:
	* gnl/gnlmarshal.list:
	* gnl/gnlobject.c:
	* gnl/gnloperation.c:
	* gnl/gnlsource.c:
	Remove gnlmarshal cruft that dates from... well....
	Ok, fine, that was here since 0.8 era and not used since :)

2006-05-05  Edward Hervey  <edward@fluendo.com>

	* common/check.mak:
	* configure.ac:
	* gnl/Makefile.am:
	* gnl/gnlfilesource.c: (hack_fakesink_new), (hack_fakesink_free),
	(find_hack_fakesink), (decodebin_new_pad_cb),
	(decodebin_pad_removed_cb), (gnl_filesource_dispose),
	(gnl_filesource_prepare), (gnl_filesource_send_event):
	* gnl/gnlmarshal.list:
	* tests/Makefile.am:

2006-05-05  Edward Hervey  <edward@fluendo.com>

	* gnl/gnlcomposition.c: (gnl_composition_dispose),
	(lock_child_state), (gnl_composition_reset), (get_new_seek_event),
	(gnl_composition_change_state), (no_more_pads_object_cb),
	(update_pipeline):
	If srcpad of top gnlobject is not available, store pending child seek so
	we can send it when the pad appears.
	Lock all childs in READY. They will be automatically (un)locked in
	update_pipeline()
	Add GST_SEEK_FLAG_ACCURATE to the seek event.
	* gnl/gnlobject.c: (translate_incoming_seek),
	(gnl_object_change_state):
	Add GST_SEEK_FLAG_ACCURATE to incoming seek events if it wasn't already
	there.
	GnlObject::update() virtual method is called in READY->PAUSED before
	calling the parent _change_state()
	* gnl/gnlsource.c: (gnl_source_class_init), (gnl_source_prepare),
	(element_pad_removed_cb), (ghost_seek_pad), (pad_blocked_cb),
	(pad_event_probe), (gnl_source_add_element),
	(gnl_source_change_state):
	We need to block on events. Added an event_probe for that.
	Implement GnlObject::prepare() so we can create a seek event if the
	GnlSource is used stand-alone (not in composition).
	* tests/check/Makefile.am:
	* tests/check/gnlsource.c: (gst_element_factory_make_or_warn),
	(gnlsource_pad_added_cb), (compare_segments),
	(sinkpad_event_probe), (sinkpad_buffer_probe), (videotest_gnl_src),
	(videotest_in_bin_gnl_src), (segment_new), (GST_START_TEST),
	(gnonlin_suite), (main):
	New unit test for testing standalone GnlSource behaviour
	* tests/check/simple.c: (composition_pad_added_cb),
	(sinkpad_event_probe), (sinkpad_buffer_probe),
	(videotest_in_bin_gnl_src), (GST_START_TEST), (gnonlin_suite):
	I have to admit the tests were... really borked.
	Now they're much more sensitive.

2006-04-25  Edward Hervey  <edward@fluendo.com>

	* configure.ac:
	Back to development cycle

=== release 0.10.3 ===

2006-04-25   <>

	* configure.ac:
	  releasing 0.10.3, "Birthday Cake"

2006-04-25  Edward Hervey  <edward@fluendo.com>

	* gnl/gnlfilesource.c: (gnl_filesource_prepare),
	(gnl_filesource_send_event):
	First event sent in _prepare() should have the flush flag.
	Smells like a second paperbag release...

2006-04-21  Edward Hervey  <edward@fluendo.com>

	* configure.ac:
	Back to development cycle

=== release 0.10.2 ===

2006-04-21   <>

	* configure.ac:
	  releasing 0.10.2, "... Y un cafe solo"

2006-04-10  Edward Hervey  <edward@fluendo.com>

	* gnl/gnlobject.c: (gnl_object_change_state):
	'really' wrong state_change handling

2006-04-07  Edward Hervey  <edward@fluendo.com>

	* COPYING:
	Convert all remaining files to be coherent with the change to LGPL
	licensing.

2006-04-07  Edward Hervey  <edward@fluendo.com>

	* configure.ac:
	Back to development (for good)

=== release 0.10.1 ===

2006-04-06  Thomas Vander Stichele <thomas at apestaart dot org>

	* configure.ac:
	  releasing 0.10.1, "Jamon Serrano"

2006-04-06  Edward Hervey  <edward@fluendo.com>

	* configure.ac:
	back to development

2006-04-06  Edward Hervey  <edward@fluendo.com>

	* configure.ac:
	0.10.1 release

2006-04-05  Edward Hervey  <edward@fluendo.com>

	* configure.ac:
	0.10.0.11 pre-release

2006-04-05  Edward Hervey  <edward@fluendo.com>

	* gnl/gnlcomposition.c: (gnl_composition_finalize),
	(gnl_composition_handle_message), (gnl_composition_change_state),
	(gnl_composition_add_object), (gnl_composition_remove_object):
	more memleak fixes.
	* gnl/gnlsource.c: (gnl_source_dispose), (gnl_source_finalize):
	more debug.
	* tests/check/simple.c: (GST_START_TEST), (gnonlin_suite):
	Add more debug and refcount checks.

2006-04-05  Edward Hervey  <edward@fluendo.com>

	* tests/check/Makefile.am:
	Increasing timeout for tests since we're asking a lot

2006-04-05  Edward Hervey  <edward@fluendo.com>

	* gnl/gnlcomposition.c: (ready_and_lock_child_state),
	(gnl_composition_handle_message), (handle_seek_event),
	(gnl_composition_change_state), (update_pipeline),
	(object_start_changed), (object_stop_changed),
	(object_priority_changed), (object_active_changed),
	(gnl_composition_add_object), (gnl_composition_remove_object):
	Only force state change in (update_pipeline) when not being called from
	state_change().
	Properly emit EOS/SEGMENT_DONE at the end, but don't emit SEGMENT_DONE
	for intermediate steps.
	* gnl/gnlfilesource.c:
	cleanup
	* gnl/gnlobject.c: (gnl_object_ghost_pad_full),
	(gnl_object_remove_ghost_pad):
	more debug statements
	* gnl/gnlsource.c: (gnl_source_class_init), (gnl_source_dispose),
	(gnl_source_finalize), (element_pad_added_cb),
	(element_pad_removed_cb), (ghost_seek_pad), (pad_blocked_cb),
	(has_dynamic_srcpads), (gnl_source_add_element),
	(gnl_source_remove_element), (gnl_source_send_event),
	(gnl_source_change_state):
	Make GnlSource more generic.
	It now works with dynamic and non-dynamic source pads.
	Eventually we'll be able to subclass GnlFileSource from GnlSource and
	remove most of the duplicated code.
	* tests/check/simple.c: (GST_START_TEST):
	Removed wrong newsegment checks
	Added lots more assertions

2006-04-05  Edward Hervey  <edward@fluendo.com>

	* tests/check/Makefile.am:
	Remove buildbot debug craziness since I now know what the problem is.

2006-04-04  Edward Hervey  <edward@fluendo.com>

	* tests/check/simple.c: (composition_pad_added_cb):
	Let's do a simple link.

2006-04-04  Edward Hervey  <edward@fluendo.com>

	* tests/check/Makefile.am:
	GST_DEBUG=*:4

2006-04-04  Edward Hervey  <edward@fluendo.com>

	* tests/check/Makefile.am:
	Higher debug level :(

2006-04-04  Edward Hervey  <edward@fluendo.com>

	* gnl/gnlcomposition.c: (gnl_composition_ghost_pad_set_target):
	If new target and previous target are the same, don't retarget.

2006-04-04  Edward Hervey  <edward@fluendo.com>

	* tests/check/Makefile.am:
	Forcing GST_DEBUG to figure out what's going wrong with the buildbots.

2006-04-04  Edward Hervey  <edward@fluendo.com>

	* gnl/gnlobject.c: (gnl_media_to_object_time):
	Bug in converting media time over media_stop
	

2006-04-04  Edward Hervey  <edward@fluendo.com>

	* tests/check/simple.c: (GST_START_TEST), (gnonlin_suite):
	Added new test to check start/duration/stop correctness for
	sources and compositions.

2006-04-04  Edward Hervey  <edward@fluendo.com>

	* gnl/gnlobject.c: (gnl_object_remove_ghost_pad):
	Free the GnlPadPrivate once we have removed the pad.

2006-04-04  Edward Hervey  <edward@fluendo.com>

	* gnl/gnlcomposition.c: (update_pipeline):
	update_pipeline was returning the wrong information.
	It now returns FALSE only if there was an error updating the pipeline.
	* tests/check/simple.c: (GST_START_TEST):
	The test fails if the state_change() DOES return FAILURE.

2006-04-03  Edward Hervey  <edward@fluendo.com>

	* configure.ac:
	New pre-release (0.10.0.10).
	Required version of gstreamer core/-base is 0.10.4.
	* tests/check/simple.c: (gnonlin_suite):
	Only run the tests with core > 0.10.4.0

2006-04-03  Edward Hervey  <edward@fluendo.com>

	* tests/check/simple.c: (GST_START_TEST):
	When the pipeline is set to NULL, on slow/loaded systems the pipeline
	might not have reached that state yet when checking for the refcount
	of the pipeline/bus. We now check that refcount is between 1 and 2 now.

2006-04-03  Edward Hervey  <edward@fluendo.com>

	* gnl/gnl.c: (plugin_init):
	* gnl/gnlcomposition.c: (gnl_composition_class_init),
	(hash_value_destroy), (gnl_composition_init),
	(gnl_composition_dispose), (gnl_composition_finalize),
	(unlock_child_state), (ready_and_lock_child_state),
	(gnl_composition_reset), (gnl_composition_handle_message),
	(priority_comp), (have_to_update_pipeline), (get_new_seek_event),
	(handle_seek_event), (gnl_composition_event_handler),
	(gnl_composition_ghost_pad_set_target), (get_stack_list),
	(get_clean_toplevel_stack), (get_src_pad),
	(gnl_composition_prepare), (gnl_composition_change_state),
	(objects_start_compare), (objects_stop_compare),
	(update_start_stop_duration), (no_more_pads_object_cb),
	(compare_relink_stack), (update_pipeline), (object_start_changed),
	(object_stop_changed), (object_priority_changed),
	(object_active_changed), (object_pad_removed),
	(gnl_composition_add_object), (gnl_composition_remove_object):
	* gnl/gnlcomposition.h:
	* gnl/gnlfilesource.c: (gnl_filesource_class_init),
	(compare_src_pad), (get_valid_src_pad), (ghost_seek_pad),
	(pad_blocked_cb), (decodebin_new_pad_cb),
	(decodebin_pad_removed_cb), (gnl_filesource_init),
	(gnl_filesource_dispose), (gnl_filesource_finalize),
	(gnl_filesource_prepare), (gnl_filesource_send_event),
	(gnl_filesource_set_property), (gnl_filesource_get_property):
	* gnl/gnlfilesource.h:
	* gnl/gnlobject.c: (gnl_object_dispose), (ghostpad_event_function),
	(control_internal_pad), (ghostpad_link_function),
	(ghostpad_unlink_function), (gnl_object_change_state):
	* gnl/gnlobject.h:
	* gnl/gnloperation.c: (gnl_operation_class_init),
	(gnl_operation_init):
	* gnl/gnloperation.h:
	* gnl/gnlsource.c: (gnl_source_class_init), (gnl_source_init),
	(gnl_source_dispose), (gnl_source_finalize), (compare_src_pad),
	(get_valid_src_pad), (no_more_pads_in_child),
	(gnl_source_add_element), (gnl_source_remove_element):
	* gnl/gnlsource.h:
	Indent the source code using gstreamer/tools/gst-indent

2006-04-03  Thomas Vander Stichele  <thomas at apestaart dot org>

	* configure.ac:
	* gnl/Makefile.am:
	* gnl/gnl.c:
	  clean up like the other modules

2006-03-31  Edward Hervey  <edward@fluendo.com>

	* tests/check/simple.c: (GST_START_TEST):
	more checking.

2006-03-31  Edward Hervey  <edward@fluendo.com>

	* configure.ac:
	Add debug, valgrind and gcov. Remove c++/malloc cruft
	* gnl/gnlcomposition.c: (hash_value_destroy),
	(gnl_composition_dispose), (gnl_composition_finalize),
	(unlock_child_state), (ready_and_lock_child_state),
	(gnl_composition_reset), (gnl_composition_handle_message),
	(gnl_composition_change_state), (update_pipeline),
	(object_pad_removed), (gnl_composition_add_object):
	Handle pads being removed on controlled objects, and remove the
	composition ghostpad if the object is the top-level one.
	Memleak fixes.
	Properly lock/unlock the state of the childs between READY and PAUSED.
	Properly return success or not in update_pipeline()
	* gnl/gnlfilesource.c: (decodebin_pad_removed_cb):
	Use gnl_object_remove_ghost_pad ()
	* gnl/gnlobject.c: (gnl_object_class_init), (gnl_object_dispose),
	(translate_incoming_seek), (translate_outgoing_new_segment),
	(internalpad_event_function), (control_internal_pad),
	(ghostpad_link_function), (ghostpad_unlink_function),
	(gnl_object_remove_ghost_pad), (gnl_object_change_state):
	* gnl/gnlobject.h:
	Add gnl_object_remove_ghost_pad() to properly remove the GnlPadPrivate
	data from the ghostpads used in GnlObjects.
	Memleak fixes.
	* gnl/gnlsource.c: (gnl_source_remove_element):
	* tests/check/Makefile.am:
	* tests/check/simple.c: (composition_pad_added_cb),
	(GST_START_TEST):

2006-03-30  Thomas Vander Stichele  <thomas at apestaart dot org>

	* Makefile.am:
	* configure.ac:
	* tests/check/Makefile.am:
	  use pluginsdir exposed by core and base .pc files to find
	  elements like videotestsrc and fakesink

2006-03-30  Edward Hervey  <edward@fluendo.com>

	* autogen.sh:
	Fix up autogen.sh for common/ since we're now in gstreamer cvs.

2006-03-30  Edward Hervey  <edward@fluendo.com>

	* Makefile.am:
	test/directory is gone

2006-03-30  Thomas Vander Stichele  <thomas at apestaart dot org>

	* Makefile.am:
	* autogen.sh:
	* configure.ac:
	* po/Makefile.in.in:
	* tests/check/Makefile.am:
	* tests/check/simple.c: (composition_pad_added_cb),
	(compare_segments), (sinkpad_event_probe), (videotest_gnl_src),
	(segment_new), (GST_START_TEST), (gnonlin_suite), (main):
	  make similar to the other gstreamer modules
	  remove gettext stuff

2006-03-29  Edward Hervey  <edward@fluendo.com>

	* configure.ac:
	pre-release
	* gnl/gnl.c:
	Remove gnloperation for (pre-)release
	* test/Makefile.am:
	Fix for GST_PLUGIN_PATH since the tests use videotestsrc.
	* test/simple.c: (gst_element_factory_make_or_warn),
	(videotest_gnl_src), (GST_START_TEST), (gnonlin_suite):
	Makes checks for element_factory_make()
	Make sure we are looking for the proper values.
	Comment out known broken test for (pre-)release

2006-03-29  Edward Hervey  <edward@fluendo.com>

	* Makefile.am:
	whoops, trailing back-slash

2006-03-29  Edward Hervey  <edward@fluendo.com>

	* Makefile.am:
	* configure.ac:
	* pkgconfig/Makefile.am:
	* pkgconfig/gnonlin.pc.in:
	Removing pkgconfig file generation. It's no longer needed since GNonLin
	are GStreamer plugins and check should be done using the existing tools,
	and/or at runtime.

2006-03-29  Edward Hervey  <edward@fluendo.com>

	* configure.ac:
	* test/Makefile.am:
	* test/simple.c: (composition_pad_added_cb), (compare_segments),
	(sinkpad_event_probe), (videotest_gnl_src), (segment_new),
	(GST_START_TEST), (gnonlin_suite), (main):
	Added testsuite system.
	Added first batch of test to test:
	_ proper start/stop/duration settings/update on sources and compositions
	_ proper data flow in various source combination

2006-03-28  Edward Hervey  <edward@fluendo.com>

	* gnl/gnlcomposition.c: (gnl_composition_class_init),
	(gnl_composition_reset), (gnl_composition_event_handler),
	(gnl_composition_ghost_pad_set_target), (get_clean_toplevel_stack),
	(no_more_pads_object_cb), (update_pipeline):
	Add pad template.
	More debug.
	* gnl/gnlfilesource.c: (decodebin_pad_removed_cb),
	(gnl_filesource_init):
	Add pad template
	Reset the ghostpad if the decodebin pad gets removed.
	* gnl/gnlobject.c: (gnl_object_class_init),
	(gnl_object_cleanup_func), (gnl_object_cleanup),
	(gnl_object_change_state):
	Call GnlObject::prepare AFTER calling parent change_state, otherwise
	pads won't have been re-activated, flushing flash won't have been
	removed and seek on the pads will definitely not work.
	Essential for re-using gnlobjects.
	* gnl/gnlobject.h:
	* gnl/gnlsource.c: (gnl_source_class_init):
	Add pad template

2006-03-24  Wim Taymans  <wim@fluendo.com>

	* gnl/gnlobject.c: (gnl_object_class_init), (gnl_object_init),
	(gnl_object_to_media_time), (gnl_media_to_object_time),
	(gnl_object_covers_func), (gnl_object_covers),
	(gnl_object_prepare_func), (gnl_object_prepare),
	(gnl_object_release_pad), (translate_incoming_seek),
	(translate_outgoing_seek), (translate_outgoing_new_segment),
	(internalpad_event_function), (translate_incoming_position_query),
	(internalpad_query_function), (internalpad_unlink_function),
	(flush_hack_check), (ghostpad_event_function),
	(ghostpad_query_function), (control_internal_pad),
	(ghostpad_link_function), (ghostpad_unlink_function),
	(gnl_object_ghost_pad_full), (gnl_object_ghost_pad),
	(gnl_object_ghost_pad_no_target),
	(gnl_object_ghost_pad_set_target),
	(translate_message_segment_start),
	(translate_message_segment_done), (gnl_object_handle_message),
	(gnl_object_set_caps), (update_values), (gnl_object_set_property),
	(gnl_object_get_property), (gnl_object_change_state):
	* gnl/gnlobject.h:
	Re-indent, move uncommon code out of the main flow.

	* gnl/gnlsource.c: (gnl_source_init), (gnl_source_dispose),
	(gnl_source_finalize), (no_more_pads_in_child),
	(gnl_source_add_element), (gnl_source_remove_element):
	* gnl/gnlsource.h:
	cleanups.

2006-02-20  Edward Hervey  <edward@fluendo.com>

	* gnl/gnlcomposition.c: (gnl_composition_handle_message),
	(get_new_seek_event), (get_stack_list), (get_clean_toplevel_stack),
	(update_pipeline):
	Fix proper pipeline update when going from one segment to another (as
	opposed to seek changes).
	More efficient _update_pipeline()
	Lots of debug cleanups.
	* gnl/gnlobject.c: (translate_incoming_position_query),
	(ghostpad_query_function), (translate_message_segment_done):
	Implement position query time-shifting.

2006-01-27  Edward Hervey  <edward@fluendo.com>

	* configure.ac: 
	Added requirement for explicit --prefix setting, so that GNonLin
	doesn't get installed in a path that isn't checked by the GStreamer
	registry.

2006-01-18  Edward Hervey  <edward@fluendo.com>

	0.10.0.5 release "Doner con patatas"

	* RELEASE:
	* configure.ac:

2006-01-07  Edward Hervey  <edward@fluendo.com>

	* configure.ac:
	Remove useless checks
	* gnl/Makefile.am:
	* gnl/gnl.c:
	* gnl/gnl.h:
	* gnl/gnltimeline.c:
	* gnl/gnltimeline.h:
	Remove gnltimeline.[ch]

2006-01-07  Edward Hervey  <edward@fluendo.com>

	* gnl/gnlcomposition.c: (gnl_composition_handle_message):
	I got mix up with >= vs > and <= vs <
	* gnl/gnlobject.c: (translate_message_segment_done):
	Handle the case where media_stop is GST_CLOCK_TIME_NONE

2006-01-06  Edward Hervey  <edward@fluendo.com>

	Releasing 0.10.0.4 beta release
	
	* configure.ac:
	Remove useless checks
	* gnl/Makefile.am:
	* gnl/gnl.c:
	* gnl/gnl.h:
	* gnl/gnltimeline.c:
	* gnl/gnltimeline.h:
	Remove gnltimeline.[ch]

2005-12-23  Edward Hervey  <edward@fluendo.com>

	* Makefile.am:
	* configure.ac:
	* pkgconfig/Makefile.am:
	* pkgconfig/gnonlin.pc.in:
	Add gnonlin.pc for programs depending on gnonlin.

2005-12-21  Edward Hervey  <edward@fluendo.com>

	* configure.ac:
	Back to devel cycle

2005-12-21  Edward Hervey  <edward@fluendo.com>

	Releasing 0.10.0.2 beta release
	
	* RELEASE:
	* configure.ac:

2005-12-21  Edward Hervey  <edward@fluendo.com>

	* configure.ac:
	Ignore po/ for the time being
	* gnl/Makefile.am:
	Add gnltypes.h to the list of headers
	Simplify the whole process
	* gnl/gnl.c:
	* gnl/gnl.h:
	* gnl/gnlcomposition.h:
	* gnl/gnlfilesource.h:
	* gnl/gnlobject.h:
	* gnl/gnloperation.h:
	* gnl/gnlsource.h:
	Use local include headers (<gnl/*.h> ==> "*.h")

2005-12-20  Edward Hervey  <edward@fluendo.com>

	* gnl/gnlfilesource.c:
	Cleanup
	* gnl/gnlobject.c: (translate_message_segment_done):
	Handle cases where the GST_SEGMENT_DONE has a format different from
	GST_FORMAT_TIME. In those situations, bump the segment-done value to
	object->media_start.

2005-12-20  Edward Hervey  <edward@fluendo.com>

	* gnl/gnlcomposition.c: (gnl_composition_class_init),
	(gnl_composition_init), (gnl_composition_handle_message),
	(objects_stop_compare):
	Update to use GstBin::handle_message virtual method.
	Fix **stupid** bug in stop_compare GCompareFunc.
	* gnl/gnlobject.c: (gnl_object_class_init), (gnl_object_init),
	(gnl_object_handle_message):
	* gnl/gnlobject.h:
	Update to use GstBin::handle_message virtual method

2005-12-14  Edward Hervey  <edward@fluendo.com>

	* gnl/gnlcomposition.c: (objects_start_compare),
	(objects_stop_compare):
	Returning the difference of 2 unsigned int, expecting the result
	to be negative is... somewhat idiotic :)

	* gnl/gnlcomposition.c: (gnl_composition_class_init),
	(gnl_composition_add_object):
	* gnl/gnlfilesource.c: (gnl_filesource_class_init):
	* gnl/gnlobject.c: (gnl_object_class_init),
	(gnl_object_covers_func), (translate_message_segment_start),
	(translate_message_segment_done), (update_values):
	* gnl/gnloperation.c: (gnl_operation_class_init):
	* gnl/gnlsource.c: (gnl_source_class_init):
	GNonLin debugging category is now BOLD BLUE.
	Updated debugging statements with GST_TIME_FORMAT.

2005-12-12  Edward Hervey  <edward@fluendo.com>

	* gnl/gnlcomposition.c: (compare_relink_stack):
	Whoops, don't unref too much.

2005-12-10  Edward Hervey  <edward@fluendo.com>

	* gnl/gnlcomposition.c: (gnl_composition_init),
	(gnl_composition_reset), (gnl_composition_sync_handler),
	(have_to_update_pipeline), (get_new_seek_event),
	(handle_seek_event), (gnl_composition_event_handler),
	(gnl_composition_ghost_pad_set_target), (objects_start_compare),
	(objects_stop_compare), (no_more_pads_object_cb),
	(compare_relink_stack), (update_pipeline),
	(gnl_composition_add_object):
	Implement better event handling and fix memory leaks.
	* gnl/gnlfilesource.c: (gnl_filesource_prepare):
	* gnl/gnlobject.c: (gnl_object_to_media_time),
	(gnl_media_to_object_time), (translate_incoming_seek),
	(translate_outgoing_seek), (translate_outgoing_new_segment),
	(internalpad_event_function), (internalpad_query_function),
	(internalpad_unlink_function), (ghostpad_event_function),
	(control_internal_pad), (ghostpad_unlink_function),
	(gnl_object_ghost_pad_set_target):
	Implement better event handling

2005-12-08  Edward Hervey  <edward@fluendo.com>

	* gnl/gnlfilesource.c: (pad_blocked_cb):
	Do this hack from another thread.

2005-12-02  Edward Hervey  <edward@fluendo.com>

	* configure.ac:
	Preparation for oh ten oh

2005-12-01  Edward Hervey  <edward@fluendo.com>

	* gnl/gnlcomposition.c: (gnl_composition_sync_handler),
	(objects_start_compare), (objects_stop_compare),
	(update_start_stop_duration), (update_pipeline),
	(object_start_changed), (object_stop_changed),
	(gnl_composition_add_object):
	Wow, that was some stupid error :)
	* gnl/gnlobject.c: (translate_incoming_seek),
	(internalpad_event_function), (flush_hack_check),
	(ghostpad_event_function), (control_internal_pad),
	(gnl_object_ghost_pad_full), (gnl_object_ghost_pad_no_target):
	Better flush handling.

2005-11-26  Edward Hervey  <edward@fluendo.com>

	* gnl/gnlcomposition.c: (gnl_composition_put_sync_handler),
	(gnl_composition_ghost_pad_set_target):
	* gnl/gnlobject.c: (gnl_object_put_sync_handler),
	(translate_outgoing_new_segment), (internalpad_event_function),
	(gnl_object_ghost_pad_full), (gnl_object_ghost_pad_no_target):
	* gnl/gnlobject.h:
	Update for latest API changes

2005-11-18  Edward Hervey  <edward@fluendo.com>

	* gnl/gnlfilesource.c: (gnl_filesource_class_init),
	(pad_blocked_cb), (gnl_filesource_prepare):
	Better behaviour as standalone element
	* gnl/gnlobject.c: (translate_incoming_seek):
	Added debug

2005-11-04  Edward Hervey  <edward@fluendo.com>

	* gnl/gnlcomposition.c: (gnl_composition_sync_handler),
	(get_stack_list), (send_initial_seek),
	(gnl_composition_change_state), (compare_relink_stack),
	(update_pipeline), (object_start_changed), (object_stop_changed),
	(object_priority_changed), (object_active_changed),
	(gnl_composition_add_object), (gnl_composition_remove_object):
	Fixed problem in stack traversal
	Better State-Lock handling of elements
	
	* gnl/gnlfilesource.c: (ghost_seek_pad):
	* gnl/gnlobject.c: (gnl_object_init), (internalpad_event_function),
	(flush_hack_check), (ghostpad_event_function),
	(control_internal_pad), (gnl_object_ghost_pad_full),
	(gnl_object_ghost_pad):
	* gnl/gnlobject.h:
	Added fields for segment seeking at the base GnlObject class level
	Added hack for a flushing seek issue, we get deadlocks otherwise

2005-11-03  Edward Hervey  <edward@fluendo.com>

	* gnl/gnlcomposition.c: (gnl_composition_put_sync_handler),
	(gnl_composition_init), (gnl_composition_dispose),
	(gnl_composition_sync_handler),
	(gnl_composition_ghost_pad_set_target), (get_stack_list),
	(update_start_stop_duration), (compare_relink_stack):
	Override bin sync-bus, first step to rebuilding pipeline after
	segment-done
	
	* gnl/gnlfilesource.c: (ghost_seek_pad), (pad_blocked_cb),
	(decodebin_new_pad_cb), (gnl_filesource_init):
	Use 'new-pad' signal from decodebin instead of 'no-more-pads'

	* gnl/gnlobject.c: (gnl_object_put_sync_handler),
	(gnl_object_init), (translate_incoming_seek),
	(translate_outgoing_newsegment), (translate_message_segment_start),
	(translate_message_segment_done), (gnl_object_sync_handler),
	(update_values):
	* gnl/gnlobject.h:
	Added sync bus override, with functions to time-shift segment-start
	and segment-done messages

2005-11-02  Edward Hervey  <edward@fluendo.com>

	* gnl/gnlcomposition.c: (gnl_composition_init),
	(gnl_composition_finalize), (gnl_composition_reset),
	(gnl_composition_ghost_pad_set_target),
	(gnl_composition_find_object_full), (send_initial_seek),
	(gnl_composition_change_state), (no_more_pads_object_cb),
	(compare_relink_stack), (update_pipeline),
	(gnl_composition_add_object), (gnl_composition_remove_object):
	* gnl/gnlfilesource.c: (gnl_filesource_class_init),
	(ghost_seek_pad), (pad_blocked_cb), (decodebin_no_more_pads_cb),
	(gnl_filesource_init), (gnl_filesource_send_event):
	* gnl/gnlobject.c: (internalpad_event_function),
	(internalpad_query_function), (ghostpad_event_function),
	(ghostpad_query_function), (ghostpad_link_function):
	* gnl/gnlsource.c: (no_more_pads_in_child),
	(gnl_source_add_element):
	Second part of using dynamic pads. Solves deadlocks.
	Most of the work is down in sources.
	
2005-11-02  Edward Hervey  <edward@fluendo.com>

	* configure.ac:
	up to 0.9.4.1
	* gnl/gnl.c:
	gnonlin and not GNonLin for plugin name
	* gnl/gnlcomposition.c: (hash_value_destroy),
	(gnl_composition_init), (gnl_composition_finalize),
	(gnl_composition_find_object_full), (update_pipeline),
	(gnl_composition_add_object), (gnl_composition_remove_object):
	Use a GMutex instead of a GStaticMutex
	First step to using dynamic pads : don't add ghostpad at startup
	* gnl/gnlfilesource.c: (gnl_filesource_class_init):
	beautification

2005-10-31  Edward Hervey  <edward@fluendo.com>

	* gnl/Makefile.am:
	* gnl/gnl.c:
	* gnl/gnl.h:
	* gnl/gnltypes.h:
	* gnl/gnlfilesource.c: (gnl_filesource_base_init),
	(gnl_filesource_class_init), (compare_src_pad),
	(get_valid_src_pad), (decodebin_no_more_pads_cb),
	(gnl_filesource_init), (gnl_filesource_dispose),
	(gnl_filesource_finalize), (gnl_filesource_set_property),
	(gnl_filesource_get_property):
	* gnl/gnlfilesource.h:
	Added GnlFileSource, a higher-level decodebin-based source

	* gnl/gnlcomposition.c: (gnl_composition_class_init),
	(gnl_composition_init), (gnl_composition_dispose),
	(gnl_composition_reset), (gnl_composition_bus_watch),
	(priority_comp), (get_stack_list), (get_clean_toplevel_stack),
	(gnl_composition_find_object_full), (gnl_composition_find_object),
	(get_src_pad), (gnl_composition_prepare),
	(gnl_composition_change_state), (compare_relink_stack),
	(update_pipeline), (object_start_changed), (object_stop_changed),
	(object_priority_changed), (object_active_changed),
	(gnl_composition_add_object), (gnl_composition_remove_object):
	* gnl/gnlcomposition.h:
	Added the supa-doopa traversal-with-stack functionnality for figuring out
	quickly what should be played at any given moment. Why didn't I come up
	with this before ??
	Removed deprecated pieces of code
	
	* gnl/gnlobject.c: (gnl_object_class_init),
	(gnl_object_to_media_time), (gnl_media_to_object_time),
	(gnl_object_covers), (gnl_object_prepare_func),
	(translate_incoming_seek), (translate_outgoing_seek),
	(control_internal_pad), (ghostpad_link_function),
	(ghostpad_unlink_function), (gnl_object_ghost_pad),
	(gnl_object_ghost_pad_notarget), (gnl_object_ghost_pad_set_target),
	(update_values), (gnl_object_change_state):
	* gnl/gnlobject.h:
	Fixes to the GhostPad system
	Indentation beautification
	
	* gnl/gnlsource.c: (gnl_source_class_init),
	(no_more_pads_in_child), (gnl_source_remove_element):
	* gnl/gnlsource.h:
	Removed unused/useless code

	* gnl/gnlelements.c:
	bye bye

2005-10-27  Edward Hervey  <edward@fluendo.com>

	* gnl/gnlobject.c: (translate_incoming_seek),
	(ghostpad_unlink_function), (gnl_object_ghost_pad),
	(gnl_object_ghost_pad_notarget), (gnl_object_ghost_pad_set_target):
	* gnl/gnlobject.h:
	Added two functions to be able to create GnlGhostPad without a target,
	and be able to set it later on.
	
2005-10-27  Edward Hervey  <edward@fluendo.com>

	* gnl/gnlcomposition.c: (gnl_composition_class_init),
	(hash_value_destroy), (gnl_composition_init),
	(gnl_composition_dispose), (gnl_composition_finalize),
	(objects_start_compare), (objects_stop_compare),
	(update_start_stop_duration), (object_start_changed),
	(object_stop_changed), (object_priority_changed),
	(object_active_changed), (gnl_composition_add_object),
	(gnl_composition_remove_object):
	* gnl/gnlcomposition.h:
	Initial Cleanup
	Added new threadsafe way of handling objects

	* gnl/gnlobject.c: (gnl_object_base_init), (gnl_object_class_init),
	(gnl_object_init), (gnl_object_prepare_func), (gnl_object_prepare),
	(gnl_object_release_pad), (translate_incoming_seek),
	(translate_outgoing_newsegment), (update_values),
	(gnl_object_set_property), (gnl_object_get_property),
	(gnl_object_change_state):
	* gnl/gnlobject.h:
	stop position for object and media are now read-only
	Added read/write duration for object and media
	Saner event time modifications
	Added GstObjectFlags for GnlObject for figuring out if the object is a
	source or an operation
	Re-added prepare virtual method, still have to see if it's useful, I'd
	prefer to avoid using it...
	* gnl/gnlsource.c: (gnl_source_class_init), (gnl_source_init),
	(gnl_source_dispose), (gnl_source_finalize),
	(no_more_pads_in_child), (gnl_source_remove_element):
	* gnl/gnlsource.h:
	Cleanups and proper finalize

2005-10-25  Edward Hervey  <edward@fluendo.com>

	* gnl/gnlobject.c: (gnl_object_base_init), (gnl_object_class_init),
	(gnl_object_init), (gnl_object_to_media_time),
	(gnl_media_to_object_time), (gnl_object_covers_func),
	(gnl_object_covers), (gnl_object_release_pad),
	(translate_incoming_seek), (translate_outgoing_seek),
	(translate_outgoing_newsegment), (internalpad_event_function),
	(internalpad_query_function), (ghostpad_event_function),
	(ghostpad_query_function), (control_internal_pad),
	(ghostpad_link_function), (ghostpad_unlink_function),
	(gnl_object_ghost_pad), (gnl_object_set_caps),
	(gnl_object_set_property), (gnl_object_get_property):
	* gnl/gnlobject.h:
	* gnl/gnloperation.h:
	* gnl/gnlsource.c: (gnl_source_base_init), (gnl_source_class_init),
	(gnl_source_init), (compare_src_pad), (get_valid_src_pad),
	(no_more_pads_in_child), (gnl_source_add_element),
	(gnl_source_remove_element), (gnl_source_set_property),
	(gnl_source_get_property):
	* gnl/gnlsource.h:
	* test/Makefile.am:
	Object and Source are now useable and do proper time-shifting
	
2005-10-20  Edward Hervey  <edward@fluendo.com>

	Part II of non-linear world domination.

	* Makefile.am:
	* docs/Makefile.am:
	* gnl/Makefile.am:
	* gnl/gnl.c: (plugin_init):
	* gnl/gnl.h:
	* gnl/gnlcomposition.c: (gnl_composition_class_init),
	(gnl_composition_init):
	* gnl/gnlcomposition.h:
	* gnl/gnlobject.c: (gnl_object_base_init), (gnl_object_class_init),
	(gnl_object_init), (gnl_object_get_property):
	* gnl/gnlobject.h:
	* gnl/gnloperation.c: (gnl_operation_class_init),
	(gnl_operation_init):
	* gnl/gnloperation.h:
	* gnl/gnlsource.c: (gnl_source_class_init), (gnl_source_init),
	(gnl_source_set_element), (gnl_source_get_property):
	* gnl/gnlsource.h:
	* gnl/gnltimeline.c: (gnl_timeline_base_init),
	(gnl_timeline_class_init), (gnl_timeline_init):
	* gnl/gnltimeline.h:
	Plugin and ElementFactory are now 0.9 compatible and installable
	Commented out almost everything, gradually adding features

2005-10-20  Edward Hervey  <edward@fluendo.com>

	* .cvsignore:
	* Makefile.am:
	* autogen.sh:
	* configure.ac:
	* docs/Makefile.am:
	* m4/Makefile.am:
	* m4/codeset.m4:
	* m4/gettext.m4:
	* m4/glibc21.m4:
	* m4/iconv.m4:
	* m4/intdiv0.m4:
	* m4/inttypes-pri.m4:
	* m4/inttypes.m4:
	* m4/inttypes_h.m4:
	* m4/isc-posix.m4:
	* m4/lcmessage.m4:
	* m4/lib-ld.m4:
	* m4/lib-link.m4:
	* m4/lib-prefix.m4:
	* m4/progtest.m4:
	* m4/stdint_h.m4:
	* m4/uintmax_t.m4:
	* m4/ulonglong.m4:
	* makeconfigure:
	* po/Makefile.in.in:
	* po/Rules-quot:
	* po/boldquot.sed:
	* po/en@boldquot.header:
	* po/en@quot.header:
	* po/insert-header.sin:
	* po/quot.sed:
	* po/remove-potcdate.sin:
	* test/Makefile.am:
	Make gnonlin more gst-0.9 friendly

2005-07-14  Edward Hervey  <edward@fluendo.com>

	* Makefile.am: 
	* configure.ac:
	* gnonlin-config.1:
	* gnonlin-config.in:
	* gnonlin.spec.in: (Group): 
	* gnonlin.pc.in: (Cflags): 
	Updated to 0.9 dependency,
	removed gnonlin-config

2005-06-21  Edward Hervey  <edward@fluendo.com>

	* gnl/gnltimeline.c: (gnl_timeline_new): 
	* gnl/gnlcomposition.c: (gnl_composition_new): 
	* gnl/gnloperation.c: (gnl_operation_new): 
	* gnl/gnlsource.c: (gnl_source_new): 
	
	Removed buggy GST_INFO

2005-06-09  Thomas Vander Stichele  <thomas at apestaart dot org>

	* acconfig.h:
	* acinclude.m4:
	  remove
	* common/m4/as-compiler-flag.m4:
	* common/m4/as-compiler.m4:
	* common/m4/as-libtool.m4:
	* common/m4/as-scrub-include.m4:
	* common/m4/as-version.m4:
	* common/m4/ax_create_stdint_h.m4:
	  sync with upstream
	* configure.ac:
	* gnonlin-uninstalled.pc.in:
	  fix up in sync with the installed copy
	* gnonlin.pc.in:
	  typos

2005-06-09  Thomas Vander Stichele  <thomas at apestaart dot org>

	* docs/libs/Makefile.am:
	  comment out the DOC_OVERRIDES

2005-06-08  Edward Hervey  <bilboed@bilboed.com>

	* gnl/gnltimeline.c: (gnl_timeline_timer_loop):
	avoid outputting 2 EOS events if there's only one composition

2005-06-03  Edward Hervey  <bilboed@bilboed.com>

	* configure.ac:
	* Makefile.am:
	* common/Makefile.am:
	Forgot to add some files to the dist

2005-05-26  Edward Hervey  <bilboed@bilboed.com>

	* configure.ac:	Releasing 0.2.2

2005-05-26  Edward Hervey  <bilboed@bilboed.com>

	* Makefile.am: (EXTRA_DIST):
	added normal equivalent of .in files

2005-05-25  Christian Schaller  <cschalle@wildsrc.fluendo.lan>

	* gnl/gnltimeline.c:
	* gnl/gnlsource.c:
	* gnl/gnlcomposition.c:
	GCC4 fixes

2005-05-25  Edward Hervey  <bilboed@bilboed.com>

	* gnl/gnlsource.c:
	Handle case where the seek is delayed (using pending_seek)

	* docs/libs/gnonlin-sections.txt:
	* gnl/gnltimeline.h:
	* gnl/gnlsource.h:
	* gnl/gnloperation.h:
	* gnl/gnlcomposition.h:
	removed extern _details

	* configure.ac : Releasing 0.2.1

2005-05-25  Edward Hervey  <bilboed@bilboed.com>

	* gnl/gnlsource.c: (source_queue_media): 
	missing closing parenthisis
	removed unused 'filled' variable

2005-05-25  Wouter Paesen <wouter@kangaroot.net>

	Reviewed by : Edward Hervey  <bilboed@bilboed.com>

	* gnl/gnlsource.c: (source_queue_media):
	memleak bugfix

2005-05-23  Edward Hervey  <bilboed@bilboed.com>

	* gnl/gnlsource.c:
	safer pre-rolling
	* gnl/gnltimeline.c:
	add query/event handling to timeline timer's pads
	fixed bug in request pad handling

2005-05-06  Edward Hervey  <bilboed@bilboed.com>

	* gnl/gnlsource.c:
	No more using global "gnonlin" debug category, using element specific categories

2005-05-06  Edward Hervey  <bilboed@bilboed.com>

	* gnl/gnltimeline.c:
	Added "src_%s" PadTemplate so _request_new_pad() works...
	
	* gnl/gnl.c: 
	* gnl/gnl.h:
	* gnl/gnlcomposition.c:
	* gnl/gnlobject.c:
	* gnl/gnloperation.c:
	* gnl/gnltimeline.c:
	No more using global "gnonlin" debug category, using element specific categories

	* docs/libs/tmpl/gnloperation.sgml: added "element" property documentation

	* docs/libs/gnonlin-sections.txt: removed GST_CAT_DEFAULT

2005-05-06  Edward Hervey  <bilboed@bilboed.com>

	* gnl/gnltimeline.c:
	Implemented GstElement->request_new_pad() in order to get a pad
	corresponding to a composition using standard API.
	Implement GstBin->add_element() in order to add a composition to the
	timeline using standard API.

	* gnl/gnloperation.c:
	GstElement of a GnlOperation can now be set/get using the "element" 
	property

2005-04-19  Edward Hervey  <bilboed@bilboed.com>

	* gnl/gnlcomposition.c: 
	gnl_composition_dispose was superfluous, now removed

2005-04-12  Edward Hervey  <bilboed@bilboed.com>

	* configure.ac: releasing 0.2.0 !!

2005-04-06  Edward Hervey  <bilboed@bilboed.com>

	* gnl/gnltimeline.c: (gnl_timeline_query):
	Prevent a segfault when querying position before anything is scheduled.
	Patch by Wouter Paesen.

	* gnl/gnlcomposition.c: (gnl_composition_schedule_operation): 
	Fixe scheduling when there's a gap between the operation's priority and
	the child object's priority. Patch by Wouter Paesen.

2005-04-06  Edward Hervey  <bilboed@bilboed.com>

	* gnonlin-config.in: 
	forgot to update it with new values

	* gnl/gnlsource.c: (source_getfunction):
	gcc-2.95.* compilation error

2005-04-04  Edward Hervey  <bilboed@bilboed.com>

	* test/sourcetest2.c:
	* test/pipelines.c: 
	updated to new api

	* test/Makefile.am: commenting out extra tests

	* gnl/gnlobject.c: (gnl_object_covers):	
	added gtk-doc comment

	* docs/libs/Makefile.am: corrections for distcheck

2005-03-31  Edward Hervey  <bilboed@bilboed.com>

	* docs/libs/tmpl/gnlcomposition.sgml: 
	* docs/libs/tmpl/gnlobject.sgml:
	Added documentation on GnlFindMethod, GnlCoverType and GnlDirection

2005-03-31  Edward Hervey  <bilboed@bilboed.com>

	* docs/random/design: 
	Updated explanatory documentation

2005-03-30  Edward Hervey  <bilboed@bilboed.com>

	* docs/libs/tmpl/gnlcomposition.sgml: 

2005-03-30  Edward Hervey  <bilboed@bilboed.com>

 	* gnl/gnl.h: 
	* gnl/gnlobject.h:
	* docs/libs/gnonlin-sections.txt:
	* docs/libs/tmpl/gnlobject.sgml:
	typo error in gnlobject.h,
	removed documentation for gnl_object_nearest_change()

2005-03-30  Edward Hervey  <bilboed@bilboed.com>

	* gnl/gnlobject.h:
	* gnl/gnlobject.c:
	Removed gnl_object_nearest_change() and cleanup of commented code

2005-03-30  Edward Hervey  <bilboed@bilboed.com>

	* gnl/Makefile.am:
	* gnl/gnl.h:
	* gnl/gnltypes.h:
	* gnl/gnlgroup.c:
	* gnl/gnlgroup.h:
	* gnl/gnltimeline.h:
	* gnl/gnltimeline.c:
	* gnl/gnlelements.c:
	* docs/libs/gnonlin-docs.sgml:
	* docs/libs/gnonlin-sections.txt:
	* docs/libs/gnonlin.types:
	* docs/libs/tmpl/gnltimeline.sgml:
	* docs/libs/tmpl/gnlgroup.sgml:
	Removing GnlGroup

	* docs/libs/gnonlin-docs.sgml:
	* docs/libs/gnonlin-sections.txt:
	* docs/libs/tmpl/gnlobject.sgml:
	* gnl/gnlobject.h:
	* gnl/gnlobject.c:
	Removing rate control property for GnlObject

2005-03-29  Edward Hervey  <bilboed@bilboed.com>

	* test/Makefile.am: 
	added EXTRA_DIST=pipelines.c and -I$(top_srcdir) to build flags

	* gnl/Makefile.am: (gnl_headers): forgot to add gnlobject.h

	* docs/libs/Makefile.am: (GTKDOC_CFLAGS): added -I$(top_srcdir) for build

	* Makefile.am: (EXTRA_DIST): removed gnonlin.m4

2005-03-24  Edward Hervey  <bilboed@bilboed.com>

	* docs/libs/tmpl/gnl.sgml:
	* docs/libs/tmpl/gnlcomposition.sgml:
	* docs/libs/tmpl/gnlgroup.sgml:
	* docs/libs/tmpl/gnlobject.sgml:
	* docs/libs/tmpl/gnloperation.sgml:
	* docs/libs/tmpl/gnlsource.sgml:
	* docs/libs/tmpl/gnltimeline.sgml:
	Added sgml file templates for documentation

	* docs/libs/gnonlin.types:
	* docs/libs/gnonlin-sections.txt:
	* docs/libs/gnonlin-docs.sgml:
	Added files for better hierarchy of documentation

	* configure.ac:
	* docs/Makefile.am:
	* docs/version.entities.in:
	* docs/libs/Makefile.am: 
	Added version.entities for documentation

	* docs/libs/Makefile.am: (GTKDOC_LIBS): added libgnl.la dependency

	* gnl/gnlsource.c: (source_getfunction): typo mistake

	* gnonlin.pc.in: more corrections from Wouter Paesen for correct
	dependency checks

	* configure.ac: (GST_PLUGIN_LDFLAGS), (GST_REQ): 
	sanity corrections from Wouter Paesen

2005-03-23  Edward Hervey  <bilboed@bilboed.com>

	* docs/Makefile.am: Make doc build depend on ./configure choice

	* gnl/gnl.c, gnl/gnlcomposition.c, gnl/gnlelements.c,
	gnl/gnlgroup.c, gnl/gnlgroup.h, gnl/gnlobject.c, gnl/gnlobject.h,
	gnl/gnloperation.c, gnl/gnloperation.h, gnl/gnlsource.c,
	gnl/gnlsource.h, gnl/gnltimeline.c, gnl/gnltimeline.h:
	Modifications so that elements are registered as gst-plugins

	* gnl/Makefile.am: (plugin_LTLIBRARIES): 
	use plugin_ instead of lib_ so that it's installed in the gst-plugins
	directory

	* Makefile.am: removed useless lines
	
	* gnl/gnlobject.c: (gnl_object_get_property):
	was setting an enum instead of an int

	* configure.ac: No spaces in value assignment !!

	* test/sourcetest1.c: modified datarate of fakesrc

	* gnl/gnl*.[ch]: correction for GST_DEBUG_* functions

	* gnonlin.pc.in: updated file to correct dependencies versions

2005-03-22  Edward Hervey  <bilboed@bilboed.com>

	* configure.ac, Makefile.am, docs/libs/Makefile.am, docs/Makefile.am: 
	Added gtk-doc API documentation skeleton

	* gnl/gnl*.[ch]: updated all class files for correct *.h dependency.

	* test/sourcetest1.c, test/sourcetest2.c, test/sourcetest3.c, test/sourcetest4.c :
	converted to new API

	* test/Makefile.am: deactivated most tests

